Hydraulic Nut for Bearing Assembling and Disassembling
Ultra high pressure tools commonly used for press fitting of bearings, flywheels, propellers and other work-pieces have the characteristics of stable jacking force, no impact, and no damage to work-pieces during press fitting. Through the inner ring thread of the hydraulic nut, it can be installed on shaft components, and the piston pushes the work-piece to the required installation position under the action of 70MPA-150MPA pressure.
Product Descriptions
It is a difficult and time-consuming task to install and remove the bearings installed on the tapered shaft and shaft sleeve. Using the hydraulic nut, the high-pressure driving force required for the installation of the bearing can be obtained, which makes the installation and removal of the bearing easier and faster. All hydraulic nuts are equipped with quick connectors for ultra-high pressure hydraulic pumps.
Axial and radial oiling methods are adopted, and there is no space limit.
Electric, pneumatic and manual hydraulic pumps can be selected as the power source according to user requirements.
